belajar menghubungkan switch dengan Trunk

berikut adalah konfigurasi sederhana koneksi antar switch dengan menggunakan Trunk

Switch(config)#int f0/10
Switch(config-if)#switchport mode trunk
Switch#sh int trunk
Port        Mode         Encapsulation  Status        Native vlan
Fa0/10      on           802.1q         trunking      1


Port        Vlans allowed on trunk
Fa0/10      1-1005


Port        Vlans allowed and active in management domain
Fa0/10      1,10,20,400,402


Port        Vlans in spanning tree forwarding state and not pruned
Fa0/10      1,10,20,400,402




Switch1(config)#int f0/10
Switch1(config-if)#switchport mode trunk
Switch1#sh int trunk
Port        Mode         Encapsulation  Status        Native vlan
Fa0/10      on           802.1q         trunking      1


Port        Vlans allowed on trunk
Fa0/10      1-1005


Port        Vlans allowed and active in management domain
Fa0/10      1,10,20,400,402


Port        Vlans in spanning tree forwarding state and not pruned
Fa0/10      1,10,20,400,402



sederhana kan....:))